MLLIQUEA 8 GPU Mining Rig Frame, Mining Machine System & Platform with 2500W Mining Power Supply, Barebone Motherboard for ETH/ETC, Mining Frame Case with PSU(176-264V), RAM, SSD (Without GPU)

MLLIQUEA 8 GPU Mining Rig Machine System with 2500W (176V-264V) PSU for ETH/ETC

• Our mining GPU frame case is made of high-quality steel, which is sturdy and durable and can be reused. Can fully protect your GPU and electronic equipment from damage and save your use cost.
• Built-in 2500W mining power supply, enough to support powerful computing power.
• It can ensure silent performance, low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining ETH, and any other cryptocurrency.

Specifications:

• Motherboard: 8 cards in-line PCI-E spacing 70MM
• CPU: Inter G2030
• RAM: DDR3 4GB
• Hard Disk: 128G SSD MSATA
• Cooling Fan: 4 fans 12038 4500RPM
• PSU Input: 176-264V AC
• Network Port: Gigabit RJ45 interface RTL8111E
• Display Interface HDMI
• Size of Power Supply 240mm (9.5inch) x 110mm (4.3inch) x 63mm (2.5inch)
• Working Humidity: 5%RH-95%RH non-condensing
• OS: Linux/windows
• Working Temperature -10℃~50℃

What Will You Get:

• 1x 8 GPU Mining case
• 1 x 2500W PSU
• 1 x 128GB mSATA SSD
• 8 x 6+2 PIN cable
• 15 x Screws
• 1 x Switch line

NOTE:

•  When the GPU is used for overclocking, the power consumption will be much higher. It is recommended to use it below the rated power of the power supply, otherwise, it is easy to burn the motherboard and power supply! For example, in the case of 3090 overclocking, the power consumption of a single card is about 350W, so we recommend that you use 4 cards. If 3080 overclocking, it is also 4 cards. You can install 8 cards for 3070 and 3060, which can run stably.